Hoods

This is a Good Used Original Stock 1980 80 1981 81 Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly.  The hood needs repairs in 2 places.  Please check out the pictures carefully. This hood can't be shipped to a residential address.  It requires a commecial shipping address.  This is a...

This is a Used Original 1968 68 1969 69 1970 70 1971 71 and 1972 72 Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly. This rare hood, (GM Group Number 8.000), This hood can't be shipped to a residential address.  NOTE: This hood has the numeral holes filled in and it also needs some hinge repair on on...

This is a Used Original Chevy Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly Needing Minor Repairs for 1961 and 1962 Corvette. (GM Part Number 3786968, GM Group Number 8.000). This hood can't be shipped to a residential address.  It requires a commecial shipping address.  This is a real GM...

This is an Original Used Original Chevy Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly that Needs Repairs for 1956 56 and 1957 57, (GM Part Number 3726735, GM Group Number 8.000). It is currently set up for use with hood pins.  If you are experienced with fiberglass, you can repair this hood back to...

This is a Good Used Original Chevy Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly for 1956 56 and 1957 57 Corvettes (GM Part Number 3726735, GM Group Number 8.000). This hood can't be shipped to a residential address.  It requires a commecial shipping address.  This is a real GM hood, not a re...

This is One Good Used Original Under Dash Hood Release Cable Only, with No Attaching Hardware. Compared to a new reproduction cable, the short cable is 2" shorter than the uncut part and the long cable is 1" shorter. Cable looks to have been installed OK. This hood release handle and cable assembly is for 1958-196...

This is a good used Original Chevy Corvette Small Block Flat Red Hood, (GM Part Number 3857463, GM Group Number 8.000), for 1965 65 1966 66 and 1967 67 Corvettes. This hood is in very good condition (SEE PICTURES).  The inside brace is slightly loose in the middle and could be glued back to the top skin if desired...

This is for a New High Quality Reproduction Chevrolet Corvette BB Hood Scoop Insert Grille Grill, (Replacement for GM Part Number 3894551, GM Group Number 8.055), for 1967 67 with 427 BB Engines. This item can be picked up at our Corvette Parts and Service Center, Tracy Performance, 29069 Calahan Road, Rosevi...

This is for a NOS, (New Old Stock, GM Discontinued, No Longer Available), Chevrolet Corvette BB Hood Insert Grille Grill (GM Part Number 3894551, GM Group Number 8.055) for 1967 67 with 427 BB Engines."Keep Your GM Car All GM!"  This is what you need for your Bloomington Gold, NCRS Top Flight Restoration or S...

This is a Good Used Original Chevy Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly for 1956 56 and 1957 57 (GM Part Number 3726735, GM Group Number 8.000). This hood can't be shipped to a residential address.  It requires a commecial shipping address.  This is a real GM hood, not a reproduction ...

This is a good used Original Chevy Corvette Small Block Flat Hood (GM Part Number 3857463, GM Group Number 8.000) for 1965 65 1966 66 and 1967 67. This hood is in very good condition (SEE PICTURES).  This item can not be shipped by UPS. This requires a commercial shipping address.  It a truck ship item or it ...

This is a Used Aftermarket Hand Layup Fiberglass High Rise Hood for a 1963 63 164 64 1965 65 1966 66 and 1967 67 Corvette. The it does not have a cold air box. This is the hood you usually need if you install a high rise intake manifold on any engine. This hood is approximately 2.25" taller than stock.  This ...

This is for a Pair of High Quality Aftermarket Collector Hood Louvers for Chevrolet Corvette for 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 1996 96 Corvettes. These require cutting 2 holes in the hood and then these can be bonded to the hood, not requiring any h...

This is for a Pair of High Quality Aftermarket Collector Hood Louvers for Chevrolet Corvette for 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 1996 96 Corvettes. These louvers already have the slots cut out saving much time and labor.  If you don't want them open, ...

This is a High Quality Reproduction Chevy Corvette Headlight Opening Door Module Actuator, (Replacement for GM Part Number 16523917, GM Group Number 2.755), for 1997 97 1998 98 1999 99 2000 00 2001 2002 02 2003 03 2004 04.Please search the web for info on TracyVette and thanks for your interest!The Copyrighted Info and...

This is for a NEW ACI Fiberglass Aftermarket C3 1973 to 1976 Chevy Corvette High Rise L88 Style, (Long Style without the wiper door), High Rise L-88, (L88), Hood Part #QHF035. This hood is brand new and it is a high quality hand layup part done in white gel coat. The cold air box is not included and optional ...

This is for a NEW ACI Fiberglass Aftermarket C3 1968 to 1976 Chevy Corvette High Rise NON Vented, Hood Part #QHF040. This hood is brand new and it is a high quality hand layup part done in white gel coat. This is the hood you usually need if you install a high rise intake manifold on any engine. NOTE : THIS IS A FILE P...

This is for a NEW ACI Fiberglass Aftermarket C5 1997 through 2004 Chevy Corvette NON Vented Cowl Induction High Rise Hood Part #AHF720. This hood is brand new and it is a high quality hand layup part done in white gel coat and it will still require paint to match. NOTE THIS IS A FILE PHOTO AND SHOWS THE VENTED VERSION ...

This is for a NEW ACI Fiberglass Aftermarket C3 1977 to 1982 Chevy Corvette High Rise NON-Vented Standard (NOT SHOWN), Hood Part #DHF040. This hood is brand new and it is a high quality hand layup part done in white gel coat. The vents are not opened up as shipped, but you can open them up if desired.  This is the...

This is for a NEW ACI Fiberglass Aftermarket C3 1968-72 Chevy Corvette, High Rise LT-1 or Big Block (427, 454), Hood Part #RHF020. This hood is brand new and it is a high quality hand layup part done in white gel coat. The bezel and or decals are not included and optional at extra cost if needed.  This is the...

This is a High Quality Reproduction Chevy Corvette Hood Release Cable with Handle for 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 82 Corvettes. This also included the cable stop assembly with the lock screw. This item can be picked up at ...

This is for a NEW ACI Fiberglass Aftermarket C2 1967 Chevy Corvette High Rise Big Block Hood Part #THF010. This hood is brand new and it is a high quality hand layup part done in white gel coat. The hardware, grill, hinges, support and retainers are not included and are optional at extra cost if needed.  This is t...

This is for a NEW ACI Fiberglass Aftermarket C3 1968 to 1972 Chevy Corvette Long Style, (without the wiper door), High Rise L-88, (L88), Hood Part #RHF035L. This hood is brand new and it is a high quality hand layup part done in white gel coat. The cold air box is not included and optional at extra cost if needed. &nbs...

This is for a NEW ACI Fiberglass Aftermarket C3 1977 to 1982 Chevy Corvette High Rise Vented, Hood Part #DHF030. This hood is brand new and it is a high quality hand layup part done in white gel coat. The vents are not opened up as shipped, but you can open them up if desired.  This is the hood you usually need if...

This is for a NEW ACI Fiberglass Aftermarket C3 1968 to 1976 Chevy Corvette High Rise Vented, Hood Part #QHF030. This hood is brand new and it is a high quality hand layup part done in white gel coat. The vents are not opened up as shipped, but you can open them up if desired.  This is the hood you usually need if...

This is for a NEW ACI Fiberglass Aftermarket C2 1965 to 1966 Chevy Corvette High Rise Big Block Hood Part #VHF020. This hood is brand new and it is a high quality hand layup part done in white gel coat. The hardware, grills, baffles, hinges, support and screws are not included and are optional at extra cost if needed. ...

This is for a NEW ACI Fiberglass Aftermarket C3 1968 to 1972 Chevy Corvette High Rise L-88, (L88), Hood Part #RHF035T. This is for use with the stock factory wiper door assembly.  If you want the longer version for use without the wiper door, please see our other listings.  This hood is brand new and it is a ...

This is a NOS, (New Old Stock, GM Discontinued, No Longer Available), Chevy Corvette Headlight Opening Door Module Actuator (GM Part Number 16523917, GM Group Number 2.755), for 1997 97 1998 98 1999 99 2000 00 2001 01 2002 02 2003 03 2004 04. "Keep Your GM Car All GM!" This is what you need for your Bloomington Gold, N...

This is a High Quality Reproduction Chevy Corvette Headlight Opening Door Module Actuator, (Replacement for GM Part Number 16510537, GM Group Number 2.755), for 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 1996 96. Please see us for headlight motors, bezels, housings, bulbs and all your other needs.&...

This is a High Quality US Made Reproduction Chevy Corvette RH Scissors Type Hood Support, (Replacement for the Discontinued GM Part Number 14069647, GM Group Number 8.015), for 1984 84 1985 85 1986 86 Corvettes with the Original Hood Support. These commonly fold up under heavy or improper usage.  These are stronge...

This is a Chevy Corvette Hood Release Cable, (Repro of GM 3966626, GM Group Number 8.075), for 1969L 69L 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 Corvettes.  This is a Black High Quality Reproduction. If this is not the one you need, please see our other listings.  This item can be picked ...

This is a Chevy Corvette Hood Release Cable (Repro of GM 3947959, GM Group Number 8.075) for 1968L 68L and 1969E 69E.  This is a White High Quality Reproduction. Please search the web for info on TracyVette and thanks for your interest! The Copyrighted Info and Pictures are the Property of Tracy Performa...

This is for a New Polished Stainless Steel Hood Center Brace Cover for the Underside of Your C5 1997 97 1998 98 1999 99 2000 00 2001 01 2002 02 2003 03 and 2004 04 Corvette. This will certainly dress up your underhood. NOTE: It is approximately 4" x 4' long and this only covers the center brace, the area between the ye...

This is for 1 Pair, (2), New Chevy Chevrolet Corvette Gas Rear hatch support Struts,  for 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 1996 96  Corvettes. If it is not easy to lift up your hatch, you probably need these.  There are 2 required per car and...

This is for 1 New Reproduction Chevy Chevrolet Gas Hood Lift Support Strut, (Replacement for GM Part Number 10274108, GM Group Number 8.015), for 1997 97 1998 98 1999 99 2000 00 2001 01 2002 02 2003 03 and 2004 04 Corvettes. There are 2 required per car, but this listing is only for ONE. If you want a pair, please see ...

This is for a Pair, (1 RH & 1 LH), of NOS, (New Old Stock, GM Discontinued, No Longer Available), Chevy Corvette black phosphate Female Hood Lock Latch Plates, (GM Part Number 3966627 & 3966628, GM Group Number 8.083), for 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 and 1976 76 Corvettes. You can't ...

This is a Good Used Original Chevy Corvette Hood Support that has been Chromed, (Triple Chrome Plated, Copper, Nickel, Chrome), (GM Part Number 39968865, GM Group Number 8.015), for Late 1973 73L 1974 74 1975 75 and 1976 76 Corvettes. This has the single oval hole to bolt it to the lower area on the fender skirt and th...

This is a NOS, (New Old Stock, GM Discontinued, No Longer Available), Nose Panel, sometimes called at T Panel because it looks somewhat like a T shape, (GM Part Number 3864695, GM Group Number 8.130), for 1963 63 1964 64 1965 65 1966 66 and 1967 67 Chevy Corvettes. This is a cut off piece from the front of an NOS 38974...

This is for a NEW ACI Hand Lay Up Fiberglass Aftermarket C5 1997 through 2004 Chevy Corvette Vented Cowl Induction High Rise Hood Part #AHF735. This hood is brand new and it is a high quality hand layup part done in white gel coat and it will still require paint to match. The vents on the top of the hood are NOT curren...

This is a NOS, (New Old Stock, GM Discontinued, No Longer Available) C6 Corvette Hood Insulator (GM Part Number 15929632, GM Group Number 8.021) for 2005 05 2006 06 2007 07 2008 08 and 2009 09 but we suggest you verify your particular application. It is for a Corvette without a hood light. It is an oversize shipping...

This is a NOS, (New Old Stock, GM Discontinued, No Longer Available), LH, (Left Hand), Hood Hinge Assembly, (GM Part Number 12523083, GM Group Number 8.015), for 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 and 1996 96 C4 Corvettes. This Left Hand piece is not a reprod...

This is a New Reproduction Rear Hood Ledge Weatherstrip, (Replaces Discontinued Original GM Part Number 3914293, GM Group Number 12.801), for 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 82 Chevrolet Corv...

This is a Good Used Original 1982 82 Corvette, (Fiberglass, Fiberglas, Fiber Glass), Hood Assembly. This rare, one year only hood, (GM Part Number14033721, GM Group Number 8.000), is complete with the under-hood air intake duct, baffle and the solenoid. It also has under hood lamp assembly and many of the hood seals. T...

This is a NOS, (New Old Stock, GM Discontinued), LEFT HAND ONLY Hood Hinge. This NOS Hinge, (GM Part Number 3912639, GM Group Number 8.015), is used on 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 82 Chevrolet Corvettes. This piece is not a rep...